Triumph America Installation Manual
download Secure motorcycle in an upright position. 2) Remove center stand 3) Remove saddle bags (if applicable) 4) Attach bracket A to center stand mounting point on motorcycle 5) Attach bracket D...
View ArticleTRIUMPH AMERICA AND SPEEDMASTER CALIPER COVER INSTALLATION INSTRUCTIONS
download INSTALLATION INSTRUCTIONS CALIPER COVER FOR TRIUMPH AMERICA & SPEEDMASTER #TA030 RIVCO 1. Clean caliper face with rubbing alcohol making sure it is free of grease, oil & debris. 2. If...
View ArticleTRIUMPH AMERICA AND SPEEDMASTER PASSENGER FLOORBOARDS INSTALLATION INSTRUCTIONS
download 1. Remove the 12mm nuts located behind the stock foot peg assemblies and remove the peg sets. 2. Starting on the left side locate the left floorboard assembly and left round chrome spacer...
View ArticleTRIUMPH AMERICA AND SPEEDMASTER FRONT TURN SIGNAL RELOCATORS
download 1. Remove the front turn signals as follows. The turn signal wire plugs are located inside the handlebar switch housings. Remove the two Phillips screws located on the forward facing side of...
View ArticleTRIUMPH AMERICA AND SPEEDMASTER SOLO RACK FITS INSTALLATION INSTRUCTIONS
download 1. Remove the 8mm bolt from the rear of the passenger seat. Remove the passenger seat by pushing the seat forward and lifting up at the front edge of the seat. Remove the 12mm bolt from the...
View Article
